General
168 results found
-
Support DVR with multiple cameras
Have a Defender DVR, all cameras run through that unit. Apps like ASee are horrible but the only solution for using a single IP to multiple camera viewer. Have this mixed with a few Foscam cameras. Would love to have all of them under one app. So far the app is great guys!
12 votesWe will look into it. Right now, we might suggest looking at IP Cam Viewer Pro from Nibbles and Bits which supports the DVR functionality in their app.
-
Supports Foscam cameras using the P2P port address and P2P UID for Port Forwarding.
Would like the ability to use the P2P UID and P2P port address for port forwarding for Foscam cameras.
11 votesFoscam has a lock-down on this feature – they do it very differently than other providers and may have some challenges supporting it without their help. We also are worried about using P2P since it means that the cameras continuously communicate to the outside world. Some people have expressed concern about this: https://krebsonsecurity.com/2016/02/this-is-why-people-fear-the-internet-of-things/
-
Foscam FN3108XE 720P Security Surveillance NVR Kit
I suggest that the OWLR app Foscam FN3108XE 720P Security Surveillance NVR Kit. The current Foscam NVR app requires you to have a online account and you can only view the camera on 1 device at a time. Please put this on your list of new products. Thank you.
11 votesThank you for the request and suggestion. If this is voted by more clients, it can stand a chance of being added, keep voting.
-
Foscam FI9900P add buttons for mute listen sound and IR function
Under IOS the Owler interface for the Foscam FI9828p camera offers buttons for push to Talk, mute sound and toggle IR mode.
For newly added FI9900 cams only push to talk is visible.
This is completely separate from the the PTZ interface on/off setting.I noticed that When I changed my FI9828 cam in the network for a FI9900 with keeping the same settings for Owler, all interface functions stayed available and everything was funtioning well with the FI9900 cam.
11 votes -
IOS support for Amcrest IPM -721S. You guys are great - I know you’ll get around to this soon.
this camera works well with the Amcrest app, however I would like to have all my cameras (Foscam, DLink, Amcrest) viewable using just one app - ideally OWLR
11 votes -
Several suggestions and reports
I'm pasting my iOS App Store review here to make sure it gets heard. The App Store has a dendency to over analyze reviews...
This app is great! I was able to set up my camera within a couple minutes. It scanned my network and found them all and preloaded the correct IP information. I am also able to connect remotely with my current network configuration.
I have it four stars because I have a couple concerns. Here they are;
I do not see the option to use HTTPS when connecting. This is a big deal. Please add this ASAP.…
11 votesUPDATE Mar 2016: wow. Sometimes, the best plans are up for funny. All of the things stated below are true but we are in the midst of a proper rewrite of the iOS codebase – so it may take a little longer. Humble apologies.
ORIGINAL: Justin -
Thanks for the feedback here – want to make sure you get the answers:
1. HTTPS is on the roadmap – sometime in October.
2. On the 2132 and 5222 – we do support the PTZ. But we are working on the other features.
3. If you are using a VPN, then you are always on your local network if they are on the same network – so you do not need the external details – unless you wish to access them through your home network providers router.
4. We are on the Sort feature – we had it a… -
Add audio mute for Foscam C1 v3
Hardware v1 has the audio mute button. Why not v3?
11 votes -
Get the UOKOO cameras on your list. Amazon sells loads of them. I have and your app cannot find them. My Cameras ar uokoo generation x
Uokoo sells loads of cameras and not on your list!!!!!!!!
10 votes -
Support the netgear arlo cams!
Is it possible to add support for the Netgear Arlo cameras?
10 votes -
Start doing motion alerts on older model foscams like the 75790.
Start doing motion alerts on older model foscams like the 75790.
10 votes -
FTP function
Record and play back on NAS via FTP
10 votesAdd more votes for this feature.
-
9 votes
-
Add option to change aspect ratio.
Would like to be able to change aspect ratio. My camera's are 4:3 and OWLR shows what looked like 16:9 and cuts off the top of these video feed.
9 votesThank you for the suggestion. If this receives more votes, it can be considered in the future.
-
9 votes
-
Preset camera positions
would you consider to add preset positions to the app? It would be a great new user friendly feature. Thanks
9 votesThanks for suggesting this! It is a big one and we would certainly like to add it.
You can add support for this feature by taking our survey at https://i.imgur.com/Zf6SLHH.png
-
EasyN
User friendly and great image
9 votes -
Sound
Could provide me the sound on the remote observing area? I operate a D-link 5020L ptz camera
8 votes -
8 votes
Hi!
Thanks for the awesome suggestion! We’ll take a look at this and see what we can do.
-
Scout83 Motorola cam
I like this camera put on please because it is a great camera
8 votes -
Add option to customise PT controls
Can you provide options to specify/ customise camera movement direction for gesture and screen button controls. On my cameras, left/right swipe gesture and up/down buttons move the cameras in the correct direction. However, up/down swipe gesture and left/right buttons move the cameras in the wrong (opposite) direction.
8 votesHi there,
Thanks for the suggestion! We’ll follow up on this.
- Don't see your idea?