Fix any issues with Foscam R4
I have tried and tried to add it. Although during the add, it shows the image of the camera just fine, when I go back to the list of cameras, it is always stuck on "configuring camera" and you can't do anything but edit it. If you click on "Video Settings" in the edit screen, the image comes up again, but only during the add process and video settings screen. Main list of cameras never works, so you can't click on the camera to view it.
-
Buddy commented
Look at channel setting on Owlr and change it to what your router is using. Try changing your camera port number to something that is not being in the port 80-88 range. Instead of your local ip in Owler for your cameras...try using your public ip address for the camera address (you can find that out at home by typing google seach "What is my ip address"...it should be in the form xxxx.xxxx.xxxx.xxxx). Try turning on the UPnP in the camera settings. Get a WiFi extender if the further cameras are not connecting. Signal may be too weak. Hope one of these helps!
-
Anonymous commented
I also have exactly the same issue on two different android phones. Two Fosbaby P1 camera's, one was already setup correctly and works as expected. Adding the second one (with same camera settings) results in this problem.... Do you have a solution for this?
-
Mira commented
ما في كميرا
-
Heather Hawkins commented
I'm having the same problem!
-
svein roger commented
password user name model f19826p