Hi OWLR Team!

I'd love to be able to access my cameras behind my VPN. From other apps, I can access computers and my cameras via their internal IPs when my phone is connected to my VPN, but I cannot seem to connect to my cameras via their internal IP from OWLR while connected to the VPN.

Also, most or all of my cameras now support HTTPS protocol. It would also be a great enhancement if OWLR supported this secure protocol too. If it already does please disregard, I just didn't seem to be able to connect to the cameras when using the secure port number.

Thanks for such a great app!
Michael

The new D-Link DCS-8000LH was not discovered by OWLR.
http://us.dlink.com/products/cameras/mini-hd-wi-fi-camera-dcs-8000lh/

The camera has no wired ethernet so the initial configuration is done over Bluetooth BLE using a smartphone app.

I could not find that there is any web administration interface available for configuration.
But here is what I could reverse engineer about its network capabilities.

https://<local ip>/common/info.cgi
http://<local ip>/common/info.cgi
http://<public ip>:8080/common/info.cgi

model=DCS-8000LH
product=Wireless Internet Camera
brand=D-Link
version=1.01
build=01
hw_version=A
nipca=1.9.7
name=My-camera
location=
macaddr=xx:xx:xx:xx:xx:xx
ipaddr=<local ip>
netmask=255.255.255.0
gateway=192.168.0.1
wireless=yes
inputs=0
outputs=0
speaker=no
videoout=no
pir=no
icr=yes
ir=yes
mic=yes
led=no
td=no
playing_music=no
whitelightled=no

https://<local ip>/config/stream_info.cgi

vbitrates=64,128,256,384,512,768,1024,1536,2048,2560,3072,4096
vbitratelist1=1024
videos=H264
codeclist1=H264
audios=PCM,AAC
aspectratios=16:9
resolutions=1280x720
resolutionlist1=1280x720
qualitymodes=CBR,Fixquality
qualities=55,65,75,85,95
qualitylist1=55,65,75,85,95
framerates=1,5,7,10,15,20,30
frameratelist1=10,15,20,30
asamplerates=16
abitrates=256
asamplerates_AAC=16
abitrates_AAC=32
micvol=0,10,20,30,40,50,60,70,80,90,100
cur_micvol=80
vprofileformat=0.9
vprofilenum=1
vprofile1=H264
vprofileurl1=/video/ACVS-H264.cgi?profileid=1
vDprofileurl1=/av2/ACVS-H264.cgi?profileid=1
vprofileres1=1280x720
aprofilenum=2
aprofile1=PCM
aprofileurl1=/audio/ACAS.cgi
aDprofileurl1=/av2/ACAS.cgi
aprofile2=AAC
aprofileurl2=/audio/ACAS-AAC.cgi
aDprofileurl2=/av2/ACAS-AAC.cgi
vban=-|-|-|-|-|-

https://<local ip>/config/motion.cgi
https://<local ip>/config/audio_detection.cgi
https://<local ip>/config/icr.cgi
https://<local ip>/config/led.cgi
https://<local ip>/config/datetime.cgi
https://<local ip>/config/led_mode.cgi

https://<local ip>/cgi/admin/adv_snapshot_cont.cgi

<root>
<config>
<mail>
<smtpEnable1>0</smtpEnable1>
<smtpServer1 />
<smtpPort1>25</smtpPort1>
<smtpUser1 />
<smtpPass1 />
<receiver1 />
<sender1 />
<smtpInterval>600</smtpInterval>
<smtpIgnoreTime>30</smtpIgnoreTime>
<smtpEncrypt>1</smtpEncrypt>
</mail>
<ftp>
<ftpEnable1>0</ftpEnable1>
<ftpServer1 />
<ftpPort1>21</ftpPort1>
<ftpUser1 />
<ftpPass1 />
<folder1 />
<ftpInterval>300</ftpInterval>
<ftpIgnoreTime>10</ftpIgnoreTime>
<passive1>1</passive1>
<fixFile1 />
</ftp>
<snapshot>
<enable>0</enable>
<continuous>0</continuous>
<schedule>
<enable>0</enable>
<profileName>Snapshot</profileName>
<Item01>0,0,0,1,0,0</Item01>
<Item02>1,0,0,2,0,0</Item02>
<Item03>2,0,0,3,0,0</Item03>
<Item04>3,0,0,4,0,0</Item04>
<Item05>4,0,0,5,0,0</Item05>
<Item06>5,0,0,6,0,0</Item06>
<Item07>6,0,0,0,0,0</Item07>
<itemSize>7</itemSize>
</schedule>
<triggerBy>
<byMotion>1</byMotion>
<byIn1>0</byIn1>
<byIn2>0</byIn2>
<bySound>0</bySound>
</triggerBy>
<snapTo>
<toFtp>0</toFtp>
<toSmtp>0</toSmtp>
</snapTo>
</snapshot>
</config>
</root>

http://<local ip>:80/av2/ACVS-H264.cgi?profileid=1
http://<local ip>:80/video/ACVS-H264.cgi?profileid=1

video/ACVS-H264

http://<local ip>:80/audio/ACAS.cgi
http://<local ip>:80/av2/ACAS-ULAW.cgi

audio/ACAS