General
469 results found
-
Enable Push to talk - for Foscam R4
Support Foscam R4 on ios.
Enable Push to talk - for Foscam R4.
Thank's
3 votesUpdate 11/01/2017
We will be looking at this after the scripting changes to bring it more in like with the way Android handles scripts.
-
VPN Support
Original post - "External access through OpenVPN would be very appreciated."
We get quite a few requests to support VPNs in general. Feel free to add your vote here!
61 votesUPDATE: 7/12/2016
Note: Changed Request title
Definitely something we will be adding in the future.
Workaround/ fix for Android:
VPN are not supported because of the way our app binds to the port.
I personally use a VPN on my Android phone; the way I get around the issue is discovery and setup the camera’s without my VPN turned on. Once you’ve done this and all the camera’s are setup, you can then switch your VPN back on.
I’ve only tested this on my phone (Samsung S6), as the other devices in the office do not have VPN setup on them, so this isn’t a guaranteed fix.
Daniel :)
-
Supports Foscam cameras using the P2P port address and P2P UID for Port Forwarding.
Would like the ability to use the P2P UID and P2P port address for port forwarding for Foscam cameras.
11 votesFoscam has a lock-down on this feature – they do it very differently than other providers and may have some challenges supporting it without their help. We also are worried about using P2P since it means that the cameras continuously communicate to the outside world. Some people have expressed concern about this: https://krebsonsecurity.com/2016/02/this-is-why-people-fear-the-internet-of-things/
-
Audio level Threshold under which phone will be mute
Would like a feature where the sounds will mute under a certain threshold. That will allow to monitor a baby for example leaving the phone for the night with the app open and not wake up from every little noise the baby makes.
18 votesWe do plan on this “audio squelch” — the challenge has been the time and focus to deliver on this feature. We have an upcoming update that should add some power to the player on iOS which can make the squelch much easier.
-
Add setting that disables using gesture control to pan tilt the camera
It could be annoying that the camera pan-tilt position changes because you accidentally swiped the screen while viewing the camera, especially when the camera is slow to react to the pan-tilt commands sent to it (not sure if it's communication delay or due to the app or the camera) which makes it very difficult to reset to the original pan-tilt position.
With the joystick there, it's kind of redundant to have another way of controlling the pan-tilt. It might be nice for someone, but having an option of enabling/disabling the gesture control will be nice for everyone.
26 votesPlease see the discussion on swiping to get to the next camera. It is likely we will support this feature to enable the earlier one.
-
Add a button in UI to reboot the camera
Would like to initiate a reboot from the app
11 votesUPDATE 6/12/2016:
Couldn’t agree more, more than likely a long term planned feature.
-
Audible motion detection alerts.
I need to be awoken when a mentally challenged individual is wandering at night.
4 votesIf you are using Android, please check out our Beta. iOS Beta will be launching soon.
-
Bewegungserkennung mit Aufzeichnung.
Wünschenswert wäre ein Alarm bei einer Bewegungserkennung auf das Handy. Nur so lassen sich ungewollte Aktivitäten kontrollieren wenn man nicht Zuhause ist. Ausserdem kann sofort die notwendige Hilfe und Polizei verständigt werden, je nachdem ob es sich um ein Einbruch oder fehl Alarm handelt. Sollte die Bewegungserkennung aufgezeichnet werden, wäre es super dieses Video direkt vom Handy abspielen zu können. Sind diese Funktionen alle vorhanden und bleibt die Werbung aus, würde ich Geld (ca. 5 Euro) dafür bezahlen. Bitte geben Sie mir kurz Feedback ob in naher Zukunft das geplant ist, denn solange keine Bewegungserkennung vorhanden ist, nutze ich eine…
4 votesWir arbeiten an diesem Feature in den kommenden Wochen.
-
Touch ID
Incorporate Touch ID to access apps preventing unauthorized access while the phone is in unlock mode
12 votesInteresting idea, we will look into it. Probably will be a longer term idea
-
D-link baby cam dsc-850L
Will you update app to support D-link baby cam DSC-850L
7 votesIf this request receives more votes, this can be considered. All the best!
-
Foscam FN3108XE 720P Security Surveillance NVR Kit
I suggest that the OWLR app Foscam FN3108XE 720P Security Surveillance NVR Kit. The current Foscam NVR app requires you to have a online account and you can only view the camera on 1 device at a time. Please put this on your list of new products. Thank you.
11 votesThank you for the request and suggestion. If this is voted by more clients, it can stand a chance of being added, keep voting.
-
Sort/Edit cameras for Android
Be able to arrange camera order
13 votesAndroid dev has started working on this.
-
Support an IFTTT OWLR Channel
Will help with home automation
44 votesUPDATE 6/12/2016:
As usual honesty is the best policy; we are still wanting to do this but its a long term goal.
-
7 votes
Okay – we will investigate this as well.
-
Support Headphone Jack
Very important if using a mobile device on noisy environment...
35 votes -
CLOUD STORAGE
CLOUD STORAGE
4 votes -
View the entire image when in portrait mode.
The app doesn't show the entire image of my Foscam C1 while in portrait mode. Please fix that.
3 votesWe agree. Problem with the many cameras we support is that they all have different video ratios/resolutions. We are investigating how to solve this best.
-
Change/set the number of featured cameras
Current there seems to be over 50 preset featured cameras, and from what I can tell, they never change. I'd like to change that to 10 and remove the others. And then have them rotate the 10 daily so I could favorite those I like.
1 voteInteresting idea.
-
1 vote
Did you know that you can get thee MJPG stream of a live IP Camera and capture it in the Favorites channel?
-
Please support IPv6 addresses in Foscam app. My ISP only allows incoming connections over IPv6, not IPv4! Support IPv6 DNS AAAA records.
Please support IPv6 addresses in Foscam app. My ISP only allows incoming connections over IPv6, not IPv4! Support IPv6 DNS AAAA records for domain name lookup as well. My IPv6 router will port forward to the internal IPv4 local camera address.
6 votesWe will be investigating this in the second quarter of 2016.
- Don't see your idea?